It is that type of poles that are used to connect cameras on the upper side of the pole, in order to increase control and safety over areas. These poles may come in different heights depending over project as 2m, 3m, 4m, 5m, 6m, 7m, 8m, and 10m as example.
Each camera pole may handle one, two, three, or four cameras. Those cameras are connected to the arms which are connected to the pole itself. On the other hand, the angle between fixing arms could be adjusted before starting production of camera poles. As example angle between two arms may be adjusted to be fixed with 45 degree, 90 degree, or 180 degree. Referring to the preferred design from the user.
Camera poles shall not be used outside its main use, as there are engineering and statics calculations made especially to make poles suitable to be used for camera fixation only. If it had been used outside its regular use, as using for fixing PV panel in the top in addition to cameras below, and without making suitable calculations, then there is a danger of getting these poles fall in future. Because these types of extra loads spoil these calculations, shorting lifetime, and deteriorate welding, as it had been loaded further more than it had been designed to. And as a result end user shall be aware of all of that points.
